Keyboard controls
Shortcuts act on the selected node and pause while you type in a field. Press ? or the help
button in the top bar to list them.
| Keys | Action |
|---|---|
| Left / Right | Tune down or up one step |
| Shift + Left / Right | Tune ten steps |
[ / ] | Choose a smaller or larger tuning step |
f | Focus the selected node's dial; press Enter to type a frequency |
, / . | Select the previous or next channel |
m / M | Cycle the selected channel's analog mode forward or backward |
- / + or = | Lower or raise squelch by 2 dB |
s | Toggle squelch |
1–9 | Select the nth node in the patch |
p | Pin or unpin the selected node on the rack |
v | Switch between Patch and Rack |
z | Fill the window with the selected node; Escape returns |
Ctrl/⌘ Z | Undo the last workspace change, for every connected client |
Ctrl/⌘ Shift Z or Ctrl/⌘ Y | Redo |
Ctrl/⌘ C | Copy the selected nodes and the wires between them |
Ctrl/⌘ V | Paste them beside the originals |
| Backspace or Delete | Delete the selected node or wire |
| Space | Hold to talk: keys the selected Microphone, or every Microphone when none is selected |
? | Open help |
| Escape | Close an overlay or menu, or deselect |
Dial controls
Once the frequency dial has focus:
- Left and Right choose a digit.
- Up and Down change the selected digit.
- Page Up and Page Down change the next larger place.
- Home and End jump to the first or last place.
0–9set the selected digit and move to the next.- Enter opens direct frequency entry.
Select a node before scrolling its dial. This keeps canvas scrolling from changing the frequency.
With Ctrl/⌘ held, scrolling never tunes.