Operate
Decoders
Generated decoder catalog by verification level, plus trunking, voice privacy keys, and DVSI vocoder chips.
On this page
Catalog
Analog voice
5Digital voice
13Aviation
9Marine
4Amateur and HF
17Paging and telemetry
8Pictures and video
2Broadcast digital
5Weather and satellites
9Utility
17No decoders match the current filter.
Interactive band plot and search: Modes. Every mode is a channel.
Source provenance for every test capture: fixtures/README.md.
Experimental limits: DVB-T/T2 misses GSE and multi-RF TFS; GNSS lab misses an ionosphere model and feeding the fix back as station position.
Trunking
Wire Device iq → Trunk system, enter Control (MHz), and pick Protocol (or Auto-detect) and Decoder (DMR, P25 Phase 1, or MPT 1327). Runs server-side with no browser open; voice grants must fit inside the Device’s window.
| Protocol | Channel plan source |
|---|---|
| DMR Tier III / Capacity Max, P25 | Control channel broadcasts |
| DMR Capacity Plus, Hytera XPT | Search (carriers following the rest channel) |
| EDACS, LTR | Manual plan table (LCN or repeater number; LTR takes any repeater under Control; EDACS extended/ESK needs a standalone EDACS channel) |
| MPT 1327 | Band (Ch 0 + N × spacing) or plan table |
- P25 TDMA grants automatically spawn P25 Phase 2 on the granted slot.
- Priority preempts busy receivers, Lockout skips talkgroups, Only these restricts to priority list. Control failover is automatic.
Voice privacy
Enter key ID and hex key under Keys (on Trunk system: key ID:hex key). Key length selects the cipher:
| Decoder | Hex digits |
|---|---|
| DMR | 10 ARC4, 32 AES-128, 64 AES-256 (Motorola Basic Privacy auto-recovers from first silence frame) |
| P25 Phase 1 | 10 ADP, 16 DES-OFB, 32 AES-128, 64 AES-256 |
| NXDN | <= 4 scrambler, 16 DES-OFB, 64 AES-256 |
Late-entry DMR calls decrypt after two superframes if one key fits. Unmatched encrypted calls stay muted.
Vocoder chip
Software voice uses blip25. Builds with --features dvsi support USB DVSI AMBE-3000 (1 ch) and AMBE-3003 (3 ch) dongles (460800 or 921600 baud): select the serial port under Vocoder. Busy or unresponsive chips fall back to blip25.