SDRmm

Operate / Decoders

Digital voice and trunking

Operating notes for MPT 1327, P25 Phase 2, Tetrapol, TETRA, DECT, and GSM downlink.

On this page

Shared trunking, encryption keys, and DVSI vocoder setup live in Decoders.

MPT 1327

Decodes control channel grants (GTC), Alohas, acks, and broadcasts. Voice calls are analog, so Trunk system follows grants with NFM. Talkgroups encode as prefix × 8192 + ident (10/4105 → 86025).

P25 Phase 2

Tune the TDMA voice channel; WACN, system ID, and NAC auto-recover from SACCH. Slot picks TS1, TS2, or both. Encrypted calls stay muted.

Tetrapol

12.5 kHz PMR downlinks; scrambling auto-detects (or pin Scrambling). Pick VHF for 70–87 MHz. Logs control channel cell/group/paging info and traffic burst durations. Voice audio and uplinks are not decoded.

TETRA

25 kHz downlink carrier, no settings required. Logs cell identity (MCC/MNC/colour code/LA), call setup/grants, voice traffic markers, SDS (status, text, LIP positions on Map, raw hex), and mobility events. Voice audio is not decoded; air-encrypted cells log identity only.

DECT

Surveys base stations and plays unencrypted 32 kbit/s G.726 calls (needs 1.9 GHz radio > 1.728 MHz wide: HackRF/SDRplay, not RTL-SDR).

  • EU: 1880–1900 MHz (ch 0 = 1897.344 MHz counting down by 1.728 MHz; Band centre 1889.568 MHz at 20 MS/s).
  • US: 1920–1930 MHz (counting up from 1921.536 MHz; Band centre 1924.992 MHz at 10 MS/s).
  • Span: Carrier (2.304 MS/s) or Band. Side: Base, Handset, or Both.
  • Encryption marks active only after an observed grant. Encrypted calls stay muted.

Cell monitor on one downlink C0 carrier (541.667 kS/s, 200 kHz). Decodes BCCH/CCCH (cell ID, neighbours, paging, assignments). Enable Follow to decode non-hopping SDCCH/8 or SDCCH/4 on the same ARFCN (LAPDm, RR/MM/CC/SS/SMS, A5 cipher command). Ciphered traffic and hopping channels are not decoded.

Edit this page on GitHub

Esc