Radios
Network and virtual sources
Connect rtl_tcp, SpyServer, SDRconnect, KiwiSDR, SigMF recordings, and the signal generator.
On this page
Connect a network radio
On an empty Device node, open Network, choose Via, and enter host:port (bookmark icon saves addresses):
| Protocol | Default port |
|---|---|
rtl_tcp |
1234 |
| SpyServer | 5555 |
| SDRconnect | 5454 |
| KiwiSDR | 8073 |
| AntSDR / Pluto | 30431 |
| ESP-SDR | 80 |
If the link cannot keep up, Lost climbs; lower sample rate or use wired Ethernet.
SDRconnect
Reaches an SDRplay RSP via SDRconnect WebSocket API (SDRconnect_headless --websocket_port=5454) without local SDRplay API. Append /secondary for RSPduo’s second tuner.
- LNA counts LNA states (lower number = more gain; no IF gain). Also exposes Device VFO, Filter, Receiver selector, Network mode, Device profile, and remote Recording.
KiwiSDR
Paste any http:// or https:// URL from rx.kiwisdr.com (or password@host:8073 for private/unlocked Kiwis). Streams 12 or 20 kHz across 0–30 MHz for SSB, CW, AM, and narrowband modes. Stops without reconnecting when kicked or time-limited; retries ordinary network drops.
Other sources
- Recording tab: replays a SigMF recording with seek and recorded GPS output.
- Virtual tab: built-in signal generator (tone, FM, LoRa, BSS, DVB-T, ATV, PER, noise figure, VLF). Debug builds also list synthetic array/TX radios.