SDRmm

Operate

Position and satellites

Station GPS/heading sources, satellite pass prediction, automatic Doppler correction, and pass-gated hardware.

On this page
GPS positionFixed, serial, gpsd, or phoneSatelliteOrbit & DopplerDeviceOpens 30 s before AOSMeteor LRPTDoppler-trackedRotatorTrack modeMapFootprint & ground trackpositioncontrolcontrolcontrolevents

GPS position

One GPS position node can feed ADS-B, Array, Map, Passive radar (tx), Propagation map, Recorder, Satellite, Signal hunt, Signal survey, and Triangulation.

Source Details Heading (true north)
Receiver Serial/USB NMEA on server HDT / THS (drops > 2 s old; magnetic ignored)
Network gpsd (127.0.0.1:2947) ATT reports (drops > 2 s old)
Fixed Manual lat/lon None
Phone Paired phone Fused compass + gyro + GPS

Serial and gpsd reconnect automatically; lost fixes stop feeding consumers.

Satellites

  1. Wire GPS position → Satellite position.
  2. Search by name/NORAD ID (or paste TLEs) and pick a Signal (or dial manually).
  3. Wire Satellite control → decoders (removes Doppler continuously; Device follows on Auto).
  • Pass-gated hardware: wire Satellite control → Device control (opens radio 30 s before AOS, closes at LOS; manual Stop still wins) and armed Recorder control.
  • Antenna & Map: wire control → Rotator (Track mode) and events → Map (try Globe).
  • Orbits pull from CelesTrak and transmitters from SatNOGS DB (2 h cache; warns past 7 days old).

Edit this page on GitHub

Esc