SDRmm

Operate

Rotators

Control GS-232, Winegard, rotctld, or virtual mounts for satellites, radiosondes, and passive sky scans.

On this page

Set Rotator to Track mode and wire one controller to its control input:

Radiosonde403 MHzGPS positionAntenna siteAimAz / El targetRotatorTrack modeeventspositioncontrol
  • Links: GS-232 (serial), Winegard Trav’ler (57600 baud ODU/MOT/DCM; auto-reads SM/LG motor steps, 445° az / 94° el limits, retries dropped moves), Hamlib rotctld (127.0.0.1:4533), or Virtual (6°/s az, 3°/s el).
  • Settings: Mode (Track/Manual/Park/Stop), Axes (Az+El or Az), Range (360°/450°/540° overlap), Heading (compass offset of mount 0°), Flip (180° elevation zenith flip), Step (deadband to spare motors). Passes pre-plan overlap to avoid mid-pass unwinds.

Track targets (Aim)

Wire any position decoder (Radiosonde, ADS-B, APRS) events + antenna GPS position → Aim → Rotator. Tracks newest target by default, or enter a serial/ID in Follow.

Passive RF survey (Sky scan)

Wire Device iq → Sky scan → Rotator. Set band (Offset, Width), grid (Az/El bounds, Step), and Dwell. Sweeps alternating rows and plots a sky heat map + peak bearing (editing settings stops and clears).

Edit this page on GitHub

Esc