SDRmm

Operate

Passive radar

Track aircraft bistatic range and Doppler speed using FM, DAB, or DVB-T broadcast illuminators.

On this page

Two shared-clock lanes are enough; phase calibration is only required for echo bearings (AoA).

Array2+ lanes, TogetherGPS (Fixed)Illuminator siteADS-BOptional truthPassive radarRange-Doppler & tracksMapEllipses & positionsarraytxtruthevents

Setup

  1. Wire a Together Array → Passive radar. Point one antenna at the transmitter (Ref) and pick surveillance lanes (Listen).
  2. Choose Illum (FM with CMA clean, DAB with remod clean, DVB-T, or Custom with Bandwidth) and set Offset (tx freq - Array centre).
  3. For Map, wire station GPS to the Array, a Fixed GPS at the transmitter to tx, and optional ADS-B events to truth (tags matching call signs).

Tuning and limits

  • Range / Speed / CPI / Overlap: longer CPI detects weaker echoes but blurs fast targets.
  • Clutter: ECA-B, ECA-S, NLMS, Block NLMS, or Off removes direct path and ground clutter.
  • Detect / Track: CFAR (CA/OS/GO), Pfa, Min SNR, confirmation hits/looks, and Coast.
  • GPU: Auto offloads CAF when faster. If Overloaded, shorten Range or CPI.
  • Strong direct-path leakage into surveillance antennas caps range; lane rate below illuminator bandwidth reduces range resolution.

Edit this page on GitHub

Esc