Operate
Recording and playback
Record IQ with pre-roll, channel baseband, audio, per-call WAVs, schedules, arrays, and SigMF playback.
On this page
| Node | Records | Wire from | Format |
|---|---|---|---|
| Recorder | Full Device IQ (+ pre-roll) | Device iq |
SigMF (.sigmf-data + .sigmf-meta) |
| Baseband recorder | Filtered channel IQ | Channel baseband |
SigMF |
| Audio recorder | Post-squelch/FX audio (Skip silence optional) | Channel audio |
48 kHz 16-bit WAV |
| Event output (Recordings) | One file per call | Channel events |
8 kHz 16-bit WAV |
Record persists with the workspace (continues with browser closed and across restarts). Clean shutdown finalizes open files.
Record IQ, schedules, and pre-roll
- IQ: wire
Device iq(and optionalGPS position) to Recorder. Sample rate locks while recording; drops/restarts begin a new metadata segment instead of aborting. - Schedule / Satellite: wire
Scheduleor Satellitecontrolto Recordercontrol(and Devicecontrolto sleep hardware between windows), then arm Record. - Pre-roll: enable Pre-roll (1–120 s,
seconds × rate × 8bytes, max 1 GiB) to hold recent IQ in RAM and flush it first when Record starts.
Record each call
Wire events and audio to Event output → Recordings (add Event filter ahead to skip short calls or filter talkgroups). Saves YYYYMMDDTHHMMSSZ_<MODE>_<FREQ>.wav per digital call or analog squelch opening (gaps < 1.5 s merge; > 10 min splits; analog requires squelch on; encrypted calls emit no audio). Works with Spectrum monitor too.
Record an array
Press Rec on an Array to save all lanes into one .sigmf-collection (with geometry, tier, and noise windows). Press Calibrate while recording so playback calibrates cleanly.
Play a recording
Open from Library → Recordings → Open as source (or Device → Recording). Plays IQ (and recorded GPS on position) with seek. Upload SigMF accepts .sigmf archives or .sigmf-meta/.sigmf-data pairs up to 16 GiB.
Play an array recording
Opening a collection exposes iq–iqN. Press Make array, match the recorded geometry, wire GPS, and attach processors. Calibration replays from recorded noise windows.
Storage and export
Edit name, tags, and notes in Library → Recordings (stored inside SigMF metadata). Download as .sigmf or stereo float .wav (not available for array collections). Default folder: <data>/sdrmm/recordings (audio/ for WAVs; override with --recordings-dir; containers use /data/recordings).